ZVL Product
  ZVL SERIES OF ZERO-VOLT PROGRAMMABLE ELECTRONIC LOADS (ZVL-E ETHERNET-BASED MODELS)
   
     

ZVL SERIES OF ZERO-VOLT PROGRAMMABLE DC ELECTRONIC LOADS (ZVL-E ETHERNET-BASED MODELS 200kW-1.5kW)

Like the ZVL-L models, AMREL’s ZVL “E” Zero-volt Ethernet-based dc electronic eLoad models have the industry’s highest current rating for “0-Volt” operation. In addition, they offer Ethernet and USB connectivity as well as power ratings up to 1.5kW. That’s a lot of power in a compact fully-integrated, rackmount-ready package.

AMREL’s ZVL “E” Zero-volt Ethernet-based dc electronic eLoads are specifically designed for single cell fuel cell testing, ultra-low voltage battery testing, and 0-volt load applications. Custom-tailored voltage, power & current ratings, optional impedance measurement, and 16-bit precision make ZVL “E” Zero-volt eLoads perfect for many diverse applications. 

Traditional dc Electronic Load Solutions have inherent limitations for testing single cell fuel cells and PV cells/modules. Electronic loads use power-dissipating components that require a minimum compliance voltage of 0.6Vdc ~ 1.5Vdc for operation. However, single cell fuel cell and PV cells often require the dc electronic load to operate at below 0.1Vdc.  To meet single cell fuel testing and PV cell testing requirements, most electronic loads require an external booster supply. AMREL’s ZVL “E” Zero-volt Ethernet-based eLoads are manufactured with built-in booster supplies, substantially reducing cost and space.

____________________________________________________________________________________________

MARKETS AND APPLICATIONS

    • Fuel Cells
    • • • • Single Cell and Short Stack Fuel Cell Characterization, Break-in and Testing Applications
    • • • • Gstat Impedance Measurement (EIS & AC Modulation)
    • • • • Polarization Curve Data Capture (CV & CC Control)
    • • • • Durability
    • • • • Lifetime Tests
    • • • • • Performance/Design Characterization
    • Battery Testing
    • • • • • Dynamic Profiling
    • • • • • Battery Characterization
    • • • • • Charge/Discharge and Lifetime/Cycle Tests
    Power Electronics Testing
    • • • • dc-dc Converters
    • • • • ac-dc Power Supplies
    • • • • Switching Power Supplies
    • • • • POL (Point of Loads)
    • Power Electronics and Component Testing
    • Battery Chargers & Load Profile Simulation
    • Battery Testing, Cycling and Characterization
    • Laboratory, University & R&D
    • Defense/Aerospace/Avionics/Industrial ATE and Integrated Test Systems


 
 
 
 
AMREL MANUFACTURES THE WIDEST RANGE OF ELECTRONIC TEST EQUIPMENT ON THE MARKET INCLUDING:
 
eLoad dc Electronic Loads
PLA Series of Air-cooled Programmable dc Electronic Loads
600w to 250kW
PLW Water-cooled Programmable dc Electronic Loads
3kW to 250kW+
Programmable dc 
Electronic Loads System Solutions
BPL Bench-top Programmable dc 
Electronic Loads
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 300W
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 600W
ZVL Zero-volt Programmable dc Electronic Loads
60W to 300W
ZVL Zero-volt Programmable dc Electronic Loads
ZVL Zero-volt Programmable dc Electronic Loads
200W to 1.5kW
ePower dc Power Supplies
SPD Dual-channel Programmable dc Switch Mode Power Supplies
300W to 360W

1.2kW
SPS Programmable dc Switch Mode Power Supplies
1.6kW

30kW to 900kW+
FRA Frequency Response Analyzer
100W to 200W
FRA Frequency Response Analyzer
15W to 2kW
MC-1 RS-485 Multi-channel Controller  
      MCU Ethernet Multi-channel Controller
up to 200W per Channel

E-mail an AMREL Representative at sales.ppd@ametek.com  or complete AMREL's request information form.
Call toll free (800) 733-5427 U.S only or (858) 458-0223 Intl. Monday-Friday 8am-5pm (PST) to speak with an AMREL representative
Visit AMREL’s ePower FAQs or eLoad FAQs for commonly asked product questions.
Copyright © 2010 AMETEK All Rights Reserved 9250 Brown Deer RD, San Diego CA 92121 Phone (858) 450.0085 Fax (858) 458.0267