MCU Product
  MC-E AND MC-R MULTI-CHANNEL MASTER NETWORK CONTROLLERS FEATURES:
   

MC-E and MC-R MULTI-CHANNEL MASTER NETWORK CONTROLLERS FEATURES AND BENEFITS

MC-E (Ethernet)Multi-channel Master Network Controller
AMREL’s MC-E Multi-channel Controller provides complete remote access and control of AMREL’s eLoad programmable dc electronic loads and ePower programmable dc power supplies. The MC-E reduces your vulnerability to security breaches by reducing the number of entry points down to one. Still, it enables the control of virtually unlimited programmable power devices via a closed-loop wired or wireless Ethernet network. 

MC (RS-485) Multi-channel Master Network Controller
The MC-R Multi-channel Controller connects via a RS-485 interface, providing the ultimate solution for controlling up to 31 channels using a single PC interface connection.  Choose from RS-232, GPIB or Ethernet to connect the MC-R to your PC. Use the RS-485 to control, monitor, auto-sequence, synchronize and output sequence multiple ePower supply and eLoad electronic load channels.

MC-E Ethernet Controller and MC-R RS-485 Controller Features and Benefits include:
• Uses a single PC connection to control virtually unlimited ePower or eLoad products using the MC-E Ethernet Controller
• Uses a single PC connection to control up to 31 channels using the MC RS-485 Controller
• The only controllers with the functionality to provide advanced system management
• Locally access and program devices at a distributed site, without returning to the central monitoring and
control center via wireless connectivity via the MC-E Controller
• Provides network security features that not only support TCP/IP but also a proprietary UDP (User Datagram Protocol)
for higher throughput. via the MC-E Controller
• Control, synchronize, trigger and output sequence multiple ePower or eLoad units while using one single
IP Address or PC Connection via the MC-E Controller
• MC-E and MC Controllers provide GPIB, USB, RS-232 or Optional Ethernet/USB Interface Connectivity
to the Computer via One Single Connection.
• Access Up to Eight Ethernet Devices - Expandable to Access Unlimited Devices, via Additional MC-E Controllers
• Expandable up to 31 channels via the MC Controller

 
 
 
 
AMREL MANUFACTURES THE WIDEST RANGE OF ELECTRONIC TEST EQUIPMENT ON THE MARKET INCLUDING:
 
eLoad dc Electronic Loads
PLA Series of Air-cooled Programmable dc Electronic Loads
600w to 250kW
PLW Water-cooled Programmable dc Electronic Loads
3kW to 250kW+
Programmable dc 
Electronic Loads System Solutions
BPL Bench-top Programmable dc 
Electronic Loads
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 300W
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 600W
ZVL Zero-volt Programmable dc Electronic Loads
60W to 300W
ZVL Zero-volt Programmable dc Electronic Loads
ZVL Zero-volt Programmable dc Electronic Loads
200W to 1.5kW
ePower dc Power Supplies
SPD Dual-channel Programmable dc Switch Mode Power Supplies
300W to 360W

1.2kW
SPS Programmable dc Switch Mode Power Supplies
1.6kW

30kW to 900kW+
FRA Frequency Response Analyzer
100W to 200W
FRA Frequency Response Analyzer
15W to 2kW
MC-1 RS-485 Multi-channel Controller  
      MCU Ethernet Multi-channel Controller
up to 200W per Channel

E-mail an AMREL Representative at sales.ppd@ametek.com  or complete AMREL's request information form.
Call toll free (800) 733-5427 U.S only or (858) 458-0223 Intl. Monday-Friday 8am-5pm (PST) to speak with an AMREL representative
Visit AMREL’s ePower FAQs or eLoad FAQs for commonly asked product questions.
Copyright © 2010 AMETEK All Rights Reserved 9250 Brown Deer RD, San Diego CA 92121 Phone (858) 450.0085 Fax (858) 458.0267