PEL Product
  PEL SERIES OF LOW-POWER PROGRAMMABLE DC ELECTRONIC LOADS
   
End of Life notice: Last day to buy 04-15-2014
 
     

PEL SERIES OF LOW-POWER PROGRAMMABLE DC ELECTRONIC LOADS

For years the test and measurement industry was in need of a portable, general-purpose dc electronic load. The available load solutions were either rackmount or multi-channel mainframe-based. The form factor aside, trim pots were the standard calibration method. Users in the Test and Measurement Industry demanded a load bank solution that was compact and portable, embedded with GPIB/RS-232, capable of bench-top closed-case calibration, offered dynamic operability such as profile simulation and could easily be calibrated on a bench without removing the cover.

AMREL’s PEL Series of "Low-power" Programmable dc Electronic eLoads, designed for your daily testing needs, offers affordable value, dynamic pulse shaping, auto-sequencing, embedded GPIB/RS-232 and closed-case calibration in a portable rackmount-ready package.

You will discover a wide range of options in AMREL’s PEL Series of Low-power Programmable Loads.  If you can’t find what you need, PEL models are capable of being custom-tailored to meet your application requirements.

____________________________________________________________________________________________

PEL Series Markets and Applications

• Fuel Cells
• • • • Single Cell and Short Stack Fuel Cell Characterization
• • • • Gstat Impedance Measurement (EIS & AC Modulation)
• • • • Polarization Curve Data Capture (CV & CC Control)
• • • • Durability
• • • • Lifetime Tests
• • • • Performance/Design Characterization

• Power Electronic Components Testing
• Battery Chargers & Load Profile Simulation
• Laboratories, Universities and R&D
• Defense/Aerospace/Avionics/Industrial ATE and Integrated
Test Systems

• Battery Testing
• • • • Dynamic Profiling
• • • • Battery Characterization
• • • • Charge/Discharge and Lifetime/Cycle Tests

• Power Electronics Testing
• • • • dc-dc Converters
• • • • ac-dc Power Supplies
• • • • Switching Power Supplies
• • • • POL (Point of Load)

• Portable Applications

 
 
 
 
AMREL MANUFACTURES THE WIDEST RANGE OF ELECTRONIC TEST EQUIPMENT ON THE MARKET INCLUDING:
 
eLoad dc Electronic Loads
PLA Series of Air-cooled Programmable dc Electronic Loads
600w to 250kW
PLW Water-cooled Programmable dc Electronic Loads
3kW to 250kW+
Programmable dc 
Electronic Loads System Solutions
BPL Bench-top Programmable dc 
Electronic Loads
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 300W
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 600W
ZVL Zero-volt Programmable dc Electronic Loads
60W to 300W
ZVL Zero-volt Programmable dc Electronic Loads
ZVL Zero-volt Programmable dc Electronic Loads
200W to 1.5kW
ePower dc Power Supplies
SPD Dual-channel Programmable dc Switch Mode Power Supplies
300W to 360W

1.2kW
SPS Programmable dc Switch Mode Power Supplies
1.6kW

30kW to 900kW+
FRA Frequency Response Analyzer
100W to 200W
FRA Frequency Response Analyzer
15W to 2kW
MC-1 RS-485 Multi-channel Controller  
      MCU Ethernet Multi-channel Controller
up to 200W per Channel

E-mail an AMREL Representative at sales.ppd@ametek.com  or complete AMREL's request information form.
Call toll free (800) 733-5427 U.S only or (858) 458-0223 Intl. Monday-Friday 8am-5pm (PST) to speak with an AMREL representative
Visit AMREL’s ePower FAQs or eLoad FAQs for commonly asked product questions.
Copyright © 2010 AMETEK All Rights Reserved 9250 Brown Deer RD, San Diego CA 92121 Phone (858) 450.0085 Fax (858) 458.0267